CoboSafe Accessories for CBSF Damping Elements (K1) The use of an additional damping element (K1) in combination with the different spring constants of the CBSF devices enables the measurement of the biomechanical threshold values according to EN ISO 10218-2, ISO/TS 15066, the DGUV information "FB HM-080", and the "RIA TR R15.806-2018“ according to the specifications [...]

Evaluation Software CoboSafe-Vision The CoboSafe-Vision software visualizes the force curves and pressure images determined with the CoboSafe force-pressure measuring system. It calculates and determines the transient and quasi-static forces and pressure values. Software-aided protocol The results of the force-pressure measurements with the CoboSafe devices can be conveniently evaluated using the Windows-based evaluation software CoboSafe-Vision, which [...]

Das Set CoboSafe-Tek ermittelt und visualisiert über elektronische Foliensensoren die Druckwerte und die Druckverteilung für den nach ISO/TS 15066 geforderten transienten- und statischen Druck.

Pressure Measurement Set CoboSafe-Scan The CoboSafe-Scan set is based on FUJIFILM Prescale pressure measurement films and enables the recording of pressure distribution and maximum pressure. The films react to pressure and show the pressure distribution. The pressure force is indicated by the intensity of the discolouration on Prescale films from Fujifilm. Using a scanner and [...]

Force Measurement Device CBSF-Basic Hand-held measurement device used to evaluate transient and quasi-static forces and pressures on collaborating robots The CBSF-Basic is a force measurement device which, in combination with the CoboSafe-Scan pressure measurement set, represents a simplified measuring method. A measurement device with only one spring constant is used to determine the existing collision [...]

CBSF-XS Force Measurement Device for Grippers and in Confined Gaps The CBSF-XS force gauge is part of the CoboSafe family and is designed for cases where only confined gaps are available for measurement. This applies, for example, to determining the forces of grippers when used in human-robot collaboration (HRC). The measurement device's extremely small dimensions [...]

Force Measurement Device CBSF The CoboSafe CBSF force gauges accurately check the permissible load thresholds for workplaces with human-robot collaboration (HRC). The CBSF series consists of nine individual force gauges, each with a different spring constant between 10 N/mm and 150 N/mm. The modular principle enables institutes, manufacturers, system integrators, and operators to compile fitting [...]