Fire Gas Detector for Areas with High Risk of Explosion
The GSME-X20 fire gas detector is designed for areas with a particularly high risk of explosion. It works in exactly the same way as the GSME-M4 fire gas detector, but is equipped for hazards caused by dust explosion. The four parameterizable semiconductor gas sensors detect open and concealed smoldering fires already in the incipient stage. Interference is tolerated by multi-criteria selection.
Robust and type-tested
In many industrial plants, the ATEX Directive 1999/92/EC applies to certain areas with a risk of explosion. Electrical equipment may only be operated with the appropriate approval. This also applies to fire detection technology. For this reason, the GSME fire gas detector type X20 is available in a type-tested version according to ATEX product directive 2014/34/EU as well as IECEx. It is approved for operation in particularly explosive dust atmospheres of zones 20 to 21 according to the ATEX directive.
We are pleased to assist you.Are you interested in our ADICOS system or are you planning a specific project? We will be pleased to assist you. Please contact us by phone at +49 2162 3703-0 or by e-mail (firstname.lastname@example.org) or send us a non-binding project inquiry via our inquiry form.
GSME Fire Gas Detectors
ADICOS GSME ("Gas Sensor Detection Units") are compact fire gas detectors for early detection of all types of concealed and open fires - and that already in the incipient stage. Highly sensitive yet robust and extremely safe against spurious alarms, they are ideal for fire gas detection in industrial environments. Four parameterizable semiconductor gas sensors monitor and evaluate the concentration curve of fire-characteristic gases according to multi-criteria technology. This enables the GSME detectors to distinguish real fires from interference signals. With the ADICOS software, all detector states and concentration curves can be displayed graphically. Sensitivities as well as alarm thresholds can be parameterized individually for each detector. The GSME fire gas detectors can be used in almost any indoor plant area, taking into account the air flow conditions.
Technical Data GSME-X20
|Gas sensors:||CO | H₂ | HC | NOx|
|Dimensions:||152 mm x 100 mm x 100 mm (L x W x D) (Length with cable gland and signal dome)|
|Weight:||2 kg (7 m cable included)|
|Explosion protection:||Ex ta IIIC 105°C Da / IP6x|