ADICOS HOTSPOT-X0

Logo ADICOS
ADICOS HOTSPOT-X0 Interface and Sensor Unit (right) for explosive gas atmospheres
ADICOS HOTSPOT-X0 Sensor Unit on mounting foot, for explosive gas atmospheres, front
ADICOS HOTSPOT-X0 Interface, left side, for explosive gas atmospheres
ADICOS HOTSPOT-X0 Interface, top, for explosive gas atmospheres
ADICOS HOTSPOT-X0 sensor unit on mounting foot, for gas explosive atmospheres, left side
ADICOS HOTSPOT-X0 Interface and Sensor Unit (right) for explosive gas atmospheres
ADICOS HOTSPOT-X0 Sensor Unit on mounting foot, for explosive gas atmospheres, front
ADICOS HOTSPOT-X0 Interface, left side, for explosive gas atmospheres
ADICOS HOTSPOT-X0 Interface, top, for explosive gas atmospheres
ADICOS HOTSPOT-X0 sensor unit on mounting foot, for gas explosive atmospheres, left side

Thermal imaging camera for ATEX zones 0 to 2

HOTSPOT-X0

The HOTSPOT-X0 is the world's first infrared fire detector with an approval for explosive gas atmospheres of zones 0 to 2 for the sensor unit. The associated interface is approved for ATEX zones 1 and 2. The innovative thermal imaging camera is used for early fire detection in chemical parks and gas power plants as well as in all other areas where gas explosive atmospheres prevail.

The HOTSPOT-X0 detects excess temperatures and flames and supports several alarm zones with independent alarm parameters. This ensures the best possible adaptation of the detector to the respective application. Its compact design allows it to be used even in confined areas. HOTSPOT-X0 thermal cameras can be directly integrated into the fire alarm bus for fire alarm control panels.

Sensor Unit & Interface

The HOTSPOT-X0 infrared fire detector consists of a sensor unit and an interface. The HOTSPOT-X0 sensor unit is an infrared detector unit.  The HOTSPOT-X0 Interface-X1 takes care of the evaluation of the sensor data. Together they enable optical and spatially resolved fire and heat detection within hazardous areas of ATEX zones 0, 1 and 2. The ADICOS HOTSPOT-X0 Interface-X1 is the interface between the sensor unit and the fire alarm panel and also serves as a connection distributor.

Features
  • Interface X1: Robust design due to aluminum housing, optionally stainless steel housing
  • High resistance to moisture and dust
  • Extremely responsive
  • Separate alarm thresholds for each pixel
  • Central data acquisition and visualization via PC software
  • Can be integrated into existing fire alarm systems
  • Sensor Unit and Interface are type-tested according to ATEX and IECEx
Application fields
  • Chemical parks and gas power plants as well as all other areas where gas explosive atmospheres prevail
  • ATEX zones 0 to 2
Accessories

Accessories for the sensor unit:

  • Mounting base with ball joint
  • Connection cables with a length of 10, 30, 50 or 100 meters

Accessories for the interface:

  • Cable gland for non-armored and non-potted cables
  • Cable gland for armored and non-potted cables
  • Cable gland for non-armored and potted cables
  • Cable gland for armored and potted cables
ADICOS fire detection technology, recycling plant with two conveyor belts

We are pleased to assist you.

Are you interested in our ADICOS system or are you planning a specific project? We will be pleased to assist you. Please contact us by phone at +49 2162 3703-0 or by e-mail (adicos@gte.de) or send us a non-binding project inquiry via our inquiry form.

IR Heat Detectors HOTSPOT

The detectors of the HOTSPOT product series are equipped with thermal imaging cameras and use infrared measurement technology and intelligent signal analysis to detect all types of smoldering fires and open fires, even in the incipient stage. The fast response speed of 100 milliseconds enables the monitoring of conveyor belts or other conveyor systems, e.g. on moving embers.

ADICOS HOTSPOT-X0 Interface and Sensor Unit, line draw

Technical Data HOTSPOT-X0

Interface-X1:
Explosion protection:II 2(1)G Ex db [ia Ga] IIC T4 Gb
Dimensions:220 mm x 220 mm x 180 mm (L x W x D)
Weight:8 kg (aluminum) | 20 kg (stainless steel)
Protection class:IP66
Sensor unit:
Explosion protection:II 1G Ex ia IIC T4 Ga
Dimensions:54 mm x 98 mm (Ø x L)
Weight:0.7 kg (without connection cable)
Protection class:IP66/67