ADICOS AAB
Branching and Connection Box AAB ADICOS AAB are our standard branching and connection boxes and serve as wiring aids for ADICOS detectors. They are surface-mounted junction boxes with an internally connected printed circuit board and enable the electrical connection of ADICOS detectors of all models to the special fire alarm system in a very simple [...]
ADICOS M-BUSMASTER XF
M-Bus Master M-BUSMASTER XF The M-BUSMASTER XF is the central interface for the ADICOS fire detectors. Compared to the M-BUSMASTER S, it has extended functionality (XF – Extended Function): It controls the communication with up to 255 ADICOS detectors and can also be used at long ranges. Access by a service PC is possible via [...]
ADICOS GTL-3
Test Device for GSME GTL-3 With the GTL-3, the ADICOS specialists have developed a test device that can be used for functional testing of all GSME fire gas detectors. For this purpose, the fire-typical gases are released in a controlled manner. Features Robust housing Easy handling Generation of typical fire gas components Compactness of the [...]
ADICOS HTL-2
Test Device for HOTSPOT HTL-2 The ADICOS HTL-2 is a mobile device for functional testing of all infrared fire detectors of the HOTSPOT product series. The mobile device for functional testing of all HOTSPOT type infrared fire detectors consists of a robust polystyrene housing with an integrated heating plate, which is regulated to a temperature of [...]
ADICOS HOTSPOT-X0
Thermal imaging camera for ATEX zones 0 to 2 HOTSPOT-X0 The HOTSPOT-X0 is the world's first infrared fire detector with an approval for explosive gas atmospheres of zones 0 to 2 for the sensor unit. The associated interface is approved for ATEX zones 1 and 2. The innovative thermal imaging camera is used for early [...]
ADICOS HOTSPOT-1000
Intelligent Thermal Imaging Camera HOTSPOT-1000 The HOTSPOT-1000 IR fire detector uses a thermal imaging sensor to detect the temperature distribution of an object and recognizes both smoldering fires and open fires yet in the incipient stage. In addition to the infrared sensor, a conventional camera is installed for easy alignment and orientation. With a resolution [...]
ADICOS GSME-M4
Fire Gas Detector GSME-M4 The GSME-M4 fire gas detector recognizes open and concealed smoldering fires early in the incipient stage. Four parameterizable semiconductor gas sensors are used for this purpose. They are highly sensitive and yet robust. Thanks to sintered metal filter technology, the GSME-M4 detector is protected against the ingress of dust and dirt. [...]
ADICOS GSME-X20
Fire Gas Detector for Areas with High Risk of Explosion GSME-X20 The GSME-X20 fire gas detector is designed for areas with a particularly high risk of explosion. It works in exactly the same way as the GSME-M4 fire gas detector, but is equipped for hazards caused by dust explosion. The four parameterizable semiconductor gas sensors [...]
ADICOS GSME-X22
Fire Gas Detector for Potentially Explosive Areas GSME-X22 The fire gas detector GSME-X22 is approved for use in potentially explosive dust atmospheres of ATEX zone 22 by an in-house test with manufacturer's declaration. The detector is equipped with the same functions as the fire gas detector GSME-M4 and represents an economical intermediate solution between the [...]