CoboSafe CBSF

Logo CoboSafe
CoboSafe CBSF-75 measuring plate and display
CoboSafe CBSF-75 with blue damping element
CoboSafe CBSF-75 back with push button
CoboSafe CBSF-75 front with display
CoboSafe CBSF-75 measuring plate and display
CoboSafe CBSF-75 with blue damping element
CoboSafe CBSF-75 back with push button
CoboSafe CBSF-75 front with display

Force Measurement Device

CBSF

The CoboSafe CBSF force gauges accurately check the permissible load thresholds for workplaces with human-robot collaboration (HRC). The CBSF series consists of nine individual force gauges, each with a different spring constant between 10 N/mm and 150 N/mm. The modular principle enables institutes, manufacturers, system integrators, and operators to compile fitting sets for every application and budget. The measuring devices are also immediately ready to use. There is no need to change the springs and the devices will remain accurate.

Features
  • The storage capacity is at least 100 individual measurements.
  • With its linear guided measuring mechanism, the force sensor ensures optimum measuring accuracy and reproducibility.
  • Illuminated display for showing the measured values and for menu navigation.
  • Set-up runs can be carried out without a connected computer.
  • Data transfer to the CoboSafe-Vision evaluation software can be used wirelessly or via USB interface.
  • Thanks to its small dimensions, the unit can be positioned in a practical manner.
Application fields

CBSF force gauges are an indispensable tool for HRC risk assessment. They are used wherever it must be proven that HRC applications without separating protective devices do not pose a safety problem for workers:

  • Manufacturing
  • Logistics
Accessories
cobosafe_cbsf-reihe

The requirements for collaborative robots specify body zones representing possible collision areas. Threshold values for collision forces and pressures are defined for these collision points. Additionally, biofidel properties (such as body resistance) are defined by a spring constant for each body zone. This results in nine spring constants.

CoboSafe Mensch-Roboter-Kollaboration MRK, Anwendung mit Cobot

We are pleased to assist you.

Do you need further information? Are you planning to automate your production? Are you considering performing force and pressure measurements on existing applications yourself? We are pleased to advise you on all questions concerning our CoboSafe product range. Contact us by phone at +49 2162 3703-0, by e-mail (cobosafe[at]gte.de) or send us a non-binding project inquiry via our inquiry form.

Force and Pressure Measurement System CoboSafe

CoboSafe is a force andpressure measuring system that evaluates the transient and quasi-static forces and pressures on collaborating robots. The easy-to-use system has a modular design, and it includes force measurement devices, a pressure measurement set, and evaluation software to verify compliance with the required threshold values. A different combination of force measurement devices and pressure measurement sets can be put together as needed.

DOWNLOAD PRODUCTINFORMATION
CoboSafe-CBSF-75 line drawing

Technical Data CBSF

Measuring surface80 mm Ø
Protection classIP 10
InterfaceUSB/wireless
Weight730 g … 935 g (depending on spring constant)